EM806

 

Stepper motor driver
Leadshine EM806

Digital Technology, max. 80V/8.2A

Download data sheet
Download software manual
 
Download hardware manual
Download driver software
 
Download RS232 pin layout
Product description:

The EM806 is a versatile fully digital stepping driver based on a DSP with advanced control algorithm. The EM806 is the next generation of digital stepping motor controls. It brings an unique level of system smoothness, providing optimum torque and nulls mid-range instabilities. Motor self-test and parameter auto-setup technology offers optimum responses with different motors and makes it easy to use. The driven motors can run with much smaller noise, generate less heat, and move smoother than most other drivers on the market. Its unique features make the EM806 an ideal solution for applications that require low-speed smoothness.

Additionally, the EM806 has a build-in sensorless stall detection function to eliminate the cost of feedback devices and cabling. Apart from the auto configuration, it has 16 selectable built-in auto-configuration parameters which are best matched to Leadshine's stepping motors.
Note: At present the EM806 only detects motor stall at running speeds >300RPM.

Features:
  • Anti-Resonance, provides optimum torque and nulls mid-range instabilities
  • Supply voltage up to +80VDC
  • Output current programmable, from 0.1A to 8.2A
  • Automatic idle-current reduction (in standstill mode) to reduce motor heating; function switchable
  • Motor self-test and parameter auto-setup technology, offers optimum responses with different motors
  • Pulse input frequency up to 200 kHz
  • TTL compatible and optically isolated input
  • Multi-Stepping allows a low resolution step input to produce a higher microstep output for smooth system performance
  • Microstep resolutions programmable, from full-step to 102,400 steps/rev
  • Suitable for 2-phase and 4-phase motors
  • Support PUL/DIR and CW/CCW modes
  • Over-voltage, over-current, phase-error protections
Electrical specifications:
Parameters Min Typ. Max Unit
Output current 0.1 - 8.2 (5.86 RMS) A
Supply voltage +20 +68 +80 VDC
Logic signal current 7 10 16 mA
Puls input frequency 0 - 200 kHz
Insulation resistance 500    
Further specifications:
Parameters Min Typ. Max
Microsteps/1.8° Full-step   102,400
PUL/PUL CW   X  
Double pulse CCW   X  
NEMA sizes 23   34
Motor type Mecheltron 57BYGH-XXXX   86BYGH-XXXX
Mechanical specifications: mm [inch]
Applications:

Suitable for a wide range of stepping motors of NEMA sizes 23, 24 and 34 (57x57 mm to 86x86 mm). It can be used in various kinds of machines, such as laser cutters, laser markers, high precision X-Y tables, labeling machines, and so on. Its unique features make the EM806 an ideal solution for applications that require low-speed smoothness and high performance.

Typical connection schematic:

A typical system consists of stepper motor, stepper motor driver, power supply and controller. The following image shows a typical connection schematic:

 

English