Tool Length Sensor WLS2
The WLS2 consists of a high-quality aluminum body, precisely turned and milled, a low-wear stainless push-button and a built-in microswitch.
It has a contact travel of about 1 mm. In addition to the 1 mm for actuation the switch has a sophisticated spring mechanism with a further approx. 7 mm of spring travel. This safety travel protects the tool and the switch itself from destruction, for example if the ramp is too high.
It is equipped with a 3-core cable and can thus be connected as normally closed or normally open. Fixing with Allen screws 2x M4.
The sensor is used to determine the tool length in the Z direction.
|
Elektr. Parameters: |
Min |
Typical |
Max |
Unit |
|
Operating Voltage |
- |
12 - 24 |
100 |
V DC |
|
Max. Current |
|
|
1 |
A |
|
Materials: |
|
|
Body |
Aluminum 6061 |
|
Push-button |
1.4305; X8CrNiS18-9 |
|
Cable |
PVC, 3x 0,14 mm22 |
|
Dimensions: |
|
|
Assignment: |
Terminal |
|
Diameter |
40 mm |
|
Brown |
COM |
|
Height |
approx. 41,5 mm |
|
Grey |
normal open |
|
Diameter Push-button |
14 mm |
|
White |
normal closed |
|
Stroke push-button |
approx. 8 mm |
|
|
|
|
Repeat accuracy |
±0,01 mm |
|
|
|
|
Length of the cable |
3 m |
|
|
|
